Product Overview
Product Category: | Embedded - Microcontrollers |
Kynix Part #: | KY32-TMS320F28033PNT |
Manufacturer Part#: | TMS320F28033PNT |
Manufacturer | Texas Instruments |
Description: | IC C2000™ C28x Piccolo™ MCU 32BIT 64KB FLASH 80LQFP |
Package: | 80-LQFP |
Datasheet: | |
Stock: | Yes |
Quantity: | 835 PCS |
TMS320F28033PNT Images are for reference only:
Product Specifications
Categories | Integrated Circuits (ICs) Embedded - Microcontrollers |
Series | C2000™ C28x Piccolo™ |
Family Name | Piccolo |
Part Status | Active |
Analog Comparators | 3 |
ADCs | 1 (16 x 12 bit) |
Data Bus Width | 32 Bit |
Device Core | C28x |
Data Converters | A/D 16x12b |
Dimensions | 12.2 x 12.2 x 1.45mm |
EEPROM Size | - |
Instruction Set Architecture | RISC |
Connectivity | CANbus, I²C, LINbus, SCI, SPI, UART/USART, 12C |
Lead Finish | Gold |
Max Processing Temp | 260 °C |
Maximum Operating Supply Voltage | 1.995, 3.63 V |
Maximum Speed | 60 MHz |
Minimum Operating Supply Voltage | 1.71, 2.97 V |
Mounting | Surface Mount |
Number of ADC Channels | 16 |
Number of Programmable I/Os | 45 |
Number of Timers | 3 |
Number of PCI Channels | 0 |
On-Chip ADC | 16-chx12-bit |
Operating Supply Voltage | 1.8, 3.3 V |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 105°C (TA) |
Pin Count | 80 |
Product Dimensions | 12 x 12 x 1.4 mm |
Packaging | Tray |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
Program Memory Size | 64KB (32K x 16) |
Package / Case | 80-LQFP |
Program Memory Type | Flash |
PWM Channels | 14 |
RAM Size | 10K x 16 |
Supplier Device Package | 80-LQFP (12x12) |
Speed | 60MHz |
Special Features | CAN Controller |
Supplier Package | LQFP |
Timer Resolution | 32bit |
Watchdog | 1 |
UART | 1 |
USART | 0 |
USB | 0 |
I2C | 1 |
SPI | 2 |
Ethernet | 0 |
Base Part Number | TMS320F28033 |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
TMS320F28033PNT Datasheet PDF Download:
Block Diagram
Fig. 1 TMS320F2803x Functional Block Diagram
Description
C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closedloop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Delfino™ Premium Performance family and the Piccolo™ Entry Performance family.
The F2803x Piccolo™ family of microcontrollers provides the power of the C28x core and Control Law Accelerator (CLA) coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration. An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.
Features
• High-Efficiency 32-Bit CPU (TMS320C28x)
– 60 MHz (16.67-ns Cycle Time)
– 16×16 and 32×32 MAC Operations
– 16×16 Dual MAC
– Harvard Bus Architecture
– Atomic Operations
– Fast Interrupt Response and Processing
– Unified Memory Programming Model
– Code-Efficient (in C/C++ and Assembly)
• Programmable Control Law Accelerator (CLA)
– 32-Bit Floating-Point Math Accelerator
– Executes Code Independently of the Main CPU
• Endianness: Little Endian
• JTAG Boundary Scan Support
– IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
• Low Cost for Both Device and System:
– Single 3.3-V Supply
– No Power Sequencing Requirement
– Integrated Power-on Reset and Brown-out Reset
– Low Power
– No Analog Support Pins
• Clocking:
– Two Internal Zero-Pin Oscillators
– On-Chip Crystal Oscillator and External Clock Input
– Watchdog Timer Module
– Missing Clock Detection Circuitry
• Up to 45 Individually Programmable, Multiplexed GPIO Pins With Input Filtering
• Peripheral Interrupt Expansion (PIE) Block That Supports All Peripheral Interrupts
• Three 32-Bit CPU Timers
• Independent 16-Bit Timer in Each Enhanced Pulse Width Modulator (ePWM)
• On-Chip Memory
– Flash, SARAM, OTP, Boot ROM Available
• Code-Security Module
• 128-Bit Security Key and Lock
– Protects Secure Memory Blocks
– Prevents Firmware Reverse Engineering
• Serial Port Peripherals
– One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) Module
– Two Serial Peripheral Interface (SPI) Modules
– One Inter-Integrated-Circuit (I2C) Module
– One Local Interconnect Network (LIN) Module
– One Enhanced Controller Area Network (eCAN) Module
• Enhanced Control Peripherals
– ePWM
– High-Resolution PWM (HRPWM)
– Enhanced Capture (eCAP) Module
– High-Resolution Input Capture (HRCAP) Module
– Enhanced Quadrature Encoder Pulse (eQEP) Module
– Analog-to-Digital Converter (ADC)
– On-Chip Temperature Sensor
– Comparator
• Advanced Emulation Features
– Analysis and Breakpoint Functions
– Real-Time Debug Through Hardware
• Package Options
– 56-Pin RSH Very Thin Quad Flatpack (No Lead) (VQFN)
– 64-Pin PAG Thin Quad Flatpack (TQFP)
– 80-Pin PN Low-Profile Quad Flatpack (LQFP)
• Temperature Options
– T: –40°C to 105°C
– S: –40°C to 125°C
– Q: –40°C to 125°C
Other data sheets within the file: