Product Overview
Product Category: | Embedded - Microcontrollers |
Kynix Part #: | KY32 - MSP430F5521IPN |
Manufacturer Part#: | MSP430F5521IPN |
Manufacturer | Texas Instruments |
Description: | IC MCU 16BIT 32KB FLASH 80LQFP |
Package: | 80-LQFP |
Datasheet: | |
Stock: | Yes |
Quantity: | 150 PCS |
MSP430F5521IPN Images are for reference only:
Product Specifications
Product Category | Embedded - Microcontrollers |
Manufacturer | Texas Instruments |
Series | MSP430F5xx |
Status | Active |
Product | MCU |
Package/Case | 80-LQFP |
Packaging | Tray |
ADC Channels | 16 |
ADC Resolution | 12 bit |
Address Bus Width | 0.0 |
Bit Size | 16 |
Core | MSP430 |
Core Size | 16-Bit |
Core-Processor | CPUXV2 |
Core Architecture | MSP430 |
CPU Family | MSP430 |
Connectivity | I²C, IrDA, LINbus, SCI, SPI, UART/USART, USB |
Clock Frequency Max | 32.0 MHz |
China RoHS Compliant | Yes |
Device Core | MSP430 |
DAC Channels | No |
DMA Channels | Yes |
Data Bus Width | 16 bit |
Data Converters | A/D 16x12b |
Ethernet | 0 |
EEPROM Size | - |
EU RoHS Compliant | Yes |
External Data Bus Width | 0.0 |
Frequency | 25 MHz |
Family Name | MSP430 |
Interface | I2C, IrDA, LIN, SCI, SPI, UART, USART, USB |
Interface-Type | I2C/SPI/UART/USB |
Instruction Set Architecture | RISC |
JESD-30 Code | S-PQFP-G80 |
JESD-609 Code | e4 |
Mounting Style | SMD/SMT |
Moisture Sensitivity Level | 3 |
Maximum Clock Rate | 25 MHz |
Maximum CPU Frequency | 25 MHz |
Maximum Clock Frequency | 25 MHz |
Maximum Operating Supply Voltage | 3.6 V |
Minimum Operating Supply Voltage | 1.8 V |
Number of ADCs | Single |
Number of I/O | 63 |
Number of Pins | 80 |
Number of I/O Lines | 63.0 |
Number of Timers | 4 |
Number of Terminals | 80 |
Number of A/D Converters | 16 |
On-Chip ADC | 16-chx12-bit |
Oscillator Type | Internal |
Operating-Supply-Voltage | 1.8 V to 3.6 V |
Operating Temperature Min | - 40 °C |
Operating Temperature Max | 85.0 °C |
Pin Count | 80 |
PCB changed | 80 |
PWM Channels | Yes |
Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
Product Type | 16-bit Microcontrollers - MCU |
Power Supplies | 2/3.3 |
Package Body Material | PLASTIC/EPOXY |
Package Code | LFQFP |
Package Equivalence Code | QFP80,.55SQ,20 |
Package Shape | SQUARE |
Package Style | FLATPACK, LOW PROFILE, FINE PITCH |
Peak Reflow Temperature | 260 °C |
Program Memory Size | 32 KB |
Program Memory Type | FLASH |
Programmability | Yes |
Speed | 25.0 MHz |
Sub Category | Microcontrollers |
Supply Voltage Nom | 3.0 V |
Supply Voltage Min | 2.4 V |
Supply Voltage Max | 3.6 V |
Seated Height Max | 1.6 mm |
Supplier Device Package | 80-LQFP (12x12) |
Surface Mount | Yes |
Technology | CMOS |
Terminal Form | GULL WING |
Terminal Pitch | 0.5 mm |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position | QUAD |
Temperature Grade | INDUSTRIAL |
Typical Operating Supply Voltage | 3.3|2.5 |
Time@Peak Reflow Temperature-Max | NOT SPECIFIED |
RAM-Size | 8 KB |
RAM (bytes) | 6144.0 |
ROM (words) | 32768 |
ROM Programmability | FLASH |
REACH Compliant | Yes |
Length | 12.0 mm |
Width | 12.0 mm |
Lead Free Status | Lead free |
HTS | 8542.31.00.01 |
ECCN | EAR99 |
I2C | 2 |
I2S | 0 |
CAN | 0 |
SPI | 4 |
USB | 1 |
UART | 2 |
USART | 0 |
Unit-Weight | 0.022575 oz |
Watchdog | 1 |
MSP430F5521IPN Datasheet PDF Download:
Description
The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring peripheral sets targeted for a variety of applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The microcontroller features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in 3.5 µs (typical).
The MSP430F5529, MSP430F5527, MSP430F5525, and MSP430F5521 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two universal serial communication interfaces (USCI), a hardware multiplier, DMA, a real-time clock (RTC) module with alarm capabilities, and 63 I/O pins. The MSP430F5528, MSP430F5526, MSP430F5524, and MSP430F5522 microcontrollers include all of these peripherals but have 47 I/O pins.
The MSP430F5519, MSP430F5517, and MSP430F5515 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, two universal serial communication interfaces (USCI), a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5514 and MSP430FF5513 microcontrollers include all of these peripherals but have 47 I/O pins.
Typical applications include analog and digital sensor systems, data loggers, and others that require connectivity to various USB hosts.
Features
• Low Supply-Voltage Range: 3.6 V Down to 1.8 V
• Ultralow Power Consumption
- Active Mode (AM):
All System Clocks Active
290 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical)
150 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical)
- Standby Mode (LPM3):
Real-Time Clock With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
1.9 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
1.4 µA at 3.0 V (Typical)
- Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up:
1.1 µA at 3.0 V (Typical)
- Shutdown Mode (LPM4.5):
0.18 µA at 3.0 V (Typical)
• Wake-Up From Standby Mode in 3.5 µs (Typical)
• 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
• Flexible Power Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
• Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals up to 32 MHz (XT2)
• 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
• 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
• Two Universal Serial Communication Interfaces
- USCI_A0 and USCI_A1 Each Support: Enhanced UART Supports Auto-Baudrate Detection, IrDA Encoder and Decoder, Synchronous SPI
- USCI_B0 and USCI_B1 Each Support: I2CTM, Synchronous SPI
• Full-Speed Universal Serial Bus (USB)
- Integrated USB-PHY
- Integrated 3.3-V and 1.8-V USB Power System
- Integrated USB-PLL
- Eight Input, Eight Output Endpoints
• 12-Bit Analog-to-Digital (A/D) Converter (MSP430F552x Only) With Internal Reference, Sample-and-Hold, and Autoscan Feature
• Comparator
• Hardware Multiplier Supporting 32-Bit Operations
• Serial Onboard Programming, No External Programming Voltage Needed
• Three Channel Internal DMA
• Basic Timer With Real-Time Clock Feature
Other data sheets within the file:
Datasheet | |
MSP430F5521IPN Datasheet | ![]() |