Product Overview
Product Category: | Pressure Sensors, Transducers |
Kynix Part #: | KY32-MPXAZ6115AP |
Manufacturer Part#: | MPXAZ6115AP |
Manufacturer | NXP USA Inc. |
Description: | PRESSURE SENSOR ABSOLUTE 8-SOP |
Package: | 8-SMD Module |
Datasheet: | |
Stock: | Yes |
Quantity: | 580 PCS |
MPXAZ6115AP Images are for reference only:
Product Specifications
Categories | Sensors, Transducers Pressure Sensors, Transducers |
EU RoHS | Compliant with Exemption |
ECCN (US) | EAR99 |
Part Status | Active |
HTS | 8542.39.00.01 |
Series | MPXAZ6115A |
Applications | Board Mount |
Accuracy | ±1.5% |
Body Length or Diameter | 12.06 mm |
Body Breadth | 12.06 mm |
Body Height | 7.36 mm |
Device Pressure Type | Absolute |
Operating Pressure Range | 15kPa to 115kPa |
Equivalent Overload Pressure Range (psi) | 20 to 100 |
Features Temperature | Compensated |
Halogen Free | Not Halogen Free |
Output Voltage (V) | 0.2 to 4.7 |
Linearity (%) | 1.5 % |
Minimum Operating Supply Voltage (V) | 4.75 |
Typical Operating Supply Voltage (V) | 5 |
Maximum Operating Supply Voltage (V) | 5.25 |
Maximum Supply Current (mA) | 10 |
Minimum Operating Temperature (°C) | -40 |
Maximum Operating Temperature (°C) | 125 |
Media | Air |
Maximum Pressure | 58.02PSI (400kPa) |
Maximum Overload Pressure | 400kPa |
Mounting | Surface Mount |
Nominal Supply | Current 6mA |
Number of Pins | 8 |
Output | 0.2 V ~ 4.7 V |
Operating Pressure | 16.68PSI |
Output Type | Analog Voltage, Analog |
Packaging | Tray |
Pin Count | 8 |
Port Size | Male - 0.13" (3.17mm) Tube |
Port Style | Barbed |
Package Height | 8.13(Max) |
Package Length | 18.79(Max) |
Package Width | 12.32(Max) |
PCB changed | 8 |
Package / Case | 8-SMD, Gull Wing, Side Port |
Supplier Device Package | 8-SOP |
Response Time (ms) | 1 |
Radiation Hardening | No |
Rohs Code | Yes |
Response Time | 1000 µs |
Risk Rank | 1.75 |
Supplier Package | SOP |
Standard Package Name | SOP |
Sensitivity, V/P | 45mV/kPa |
Typical Full Scale Output | 4.7VDC |
Termination | PCB |
Termination Type | SOLDER |
Voltage - Supply | 4.75V ~ 5.25V |
Lead Shape | Gull-wing |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | Not Applicable |
Additional Feature | TEMPERATURE COMPENSATED, SIGNAL CONDITION, SENSITIVITY VALUE IS 45.9 |
MPXAZ6115AP Datasheet PDF Download:
Schematic Diagrams
Fig. 1 Fully Integrated Pressure Sensor Schematic
Fig. 2 Cross Sectional Diagram SOP (Not to Scale)
Fig. 3 Typical Application Circuit (Output Source Current Operation)
Description
lThe MPxx6115 is a state-of-the-art, monolithic, signal conditioned silicon pressure sensor.
lIntegrates on-chip bipolar op-amp circuitry and thin-film resistor networks to provide a high-output signal and temperature compensation
lCombines advanced micromachining techniques, thin-film metallization and bipolar semiconductor processing to provide an accurate high-level analog output signal that is proportional to applied pressure.
lSmall form factor and high reliability of on-chip integration make the MPxx6115 pressure sensor a logical and economical choice for the system designer
Features
lImproved accuracy at high-temperature
lDurable thermoplastic (PPS) surface mount package
lTemperature compensated from -40° to +125°C
lIdeally suited for microprocessor or microcontroller-based systems
l1.5 percent maximum error over 0° to 85°C
lResistant to high humidity and common automotive media
lAvailable in small and super small outline packages
Other data sheets within the file: