MMA3201KEG Datasheet PDF - ACCELEROMETER ANALOG 20SOIC NXP

Product Overview

Product Category:	IC Chips
Kynix Part #:	KY32-MMA3201KEG
Manufacturer Part#:	MMA3201KEG
Manufacturer	NXP USA Inc.
Description:	ACCELEROMETER 45G ANALOG 20SOIC
Package:	20-SOIC (0.295", 7.50mm Width)
Datasheet:	MMA3201KEG Datasheet
Stock:	Yes
Quantity:	70 PCS

MMA3201KEG Images are for reference only:

Product Specifications

Categories	Sensors, Transducers Motion Sensors - Accelerometers
Part State	Obsolete
Accelerat	40 G
Axis	X, Y
Axis Type	Dual
Analog IC - Other Type	ANALOG CIRCUIT
Bandwidth	400 MHz
Device Sensitivity Range	47.5, 52.5 mV/g
EU RoHS Compliant	Yes
ECCN Code	EAR99
HTS Code	8542.39.00.01
Features	-
Halogen Free	No
JESD-30 Code	R-PDSO-G20
JESD-609 Code	e3
Lead Finish	Tin
Lead Free	Contains Lead
Length	12.815 mm
Max Supply Voltage	5.25 V
Min Supply Voltage	4.75 V
Moisture	3
Mounting	Surface Mount
MSL Level	3
Nominal Supply Current	8 mA
Number of Functions	1
Number of Terminals	20
Operating Temperature	-40°C ~ 125°C (TA)
Operating Voltage	4.75 to 5.25 V
Output Type	Analog Voltage
Package / Case	20-SOIC (0.295", 7.50mm Width)
Package Body Material	PLASTIC/EPOXY
Package Code	SOP
Package Description	7.50 X 12.80 MM, 1.27 MM PITCH, ROHS COMPLIANT, SOIC-20
Package Equivalence Code	SOP20,.4
Package Shape	RECTANGULAR
Package Style	SMALL OUTLINE
Packaging	Tube
Peak Reflow Temperature (Cel)	250
Pin Count	20
Product Dimensions	12.96(max) x 7.6(max) x 3.3(max)
Qualification	Not Qualified
RoHS	Compliant
Risk Rank	6.01
Rohs Code	Yes
Screening	Extended Industrial
Seated Height-Max	3.55 mm
Sensitivity (LSB/g)	-
Sensitivity (mV/g)	50
Series	Automotive, AEC-Q100, MMA
Sub Category	Other Analog ICs
Supplier Package	20-SOIC
Supply Voltage-Nom (Vsup)	5.0 V
Supply Voltage-Min (Vsup)	4.75 V
Supply Voltage-Max (Vsup)	5.25 V
Surface Mount	Yes
Technology	CMOS
Temperature Grade	AUTOMOTIVE
Terminal Finish	Matte Tin (Sn)
Terminal Form	GULL WING
Terminal Pitch	1.27 mm
Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30
Type	Analog
Voltage - Supply	4.75V ~ 5.25V
Length	12.815 mm
Width	7.5 mm

MMA3201KEG Datasheet PDF Download:

Pinouts

Figure 1. Pins Diagram

Table 1. Pinout Description

Pin No.	Pin Name	Description
1 thur 3	-	Leave unconnected.
4	-	No internal connection. Leave unconnected.
5	ST	Logic input pin used to initiate self-test.
6	X_OUT	Output voltage of the accelerometer. X Direction.
7	STATUS	Logic output pin to indicate fault.
8	V_SS	The power supply ground.
9	V_DD	The power supply input.
10	AV_DD	Power supply input (Analog).
11	Y_OUT	Output voltage of the accelerometer. Y Direction.
12 thru 16	-	Used for factory trim. Leave unconnected.
17 thru 19	-	No internal connection. Leave unconnected.
20	GND	Ground.

Figure 2. SOIC Accelerometer with Recommended Connection Diagram

Description

The MMA3201 series of dual axis (X and Y) silicon capacitive, micromachined accelerometers features signal conditioning, a 4-pole low pass filter and temperature compensation, and separate outputs for the two axes. Zero-g offset full scale span and filter cut-off are factory set and require no external devices. A full system self-test capability verifies system functionality.

Features

Sensitivity in two separate axes: 40g X-axis and 40g Y-axisIntegral Signal Conditioning
Linear Output
Ratiometric Performance
4th Order Bessel Filter Preserves Pulse Shape Integrity
Calibrated Self-test
Low Voltage Detect, Clock Monitor, and EPROM Parity Check Status
Transducer Hermetically Sealed at Wafer Level for Superior Reliability
Robust Design, High Shocks Survivability
Qualified AEC-Q100, Rev. F Grade 2 (-40°C/ +105°C)