Home  Embedded-Microcontrollers

Apr 25 2019

MK53DN512ZCMD10 Datasheet PDF - IC ARM MCU 32BIT 512KB FLASH 144BGA NXP

Product Overview

Product Category:

Embedded - Microcontrollers

Kynix Part #:

KY32-MK53DN512ZCMD10

Manufacturer Part#:

MK53DN512ZCMD10

Manufacturer

NXP USA Inc.

Description:

IC MCU 32BIT 512KB FLASH 144BGA

Package:

144-LBGA

Datasheet:

MK53DN512ZCMD10 Datasheet

Stock:

Yes

Quantity:

470 PCS


MK53DN512ZCMD10 Images are for reference only:

MK53DN512ZCMD10 Image

Product Specifications 

Categories

Integrated Circuits (ICs)

Embedded - Microcontrollers

Series

Kinetis K50

Analog Comparators

3

Core Size

32-Bit

Connectivity

EBI/EMI, Ethernet, I²C, IrDA, SD, SPI, UART/USART, USB, USB OTG

Data Bus Width

32 Bit

Device Core

ARM® Cortex®-M4

Data Converters

A/D 41x16b; D/A 2x12b

EEPROM Size

-

Instruction Set Architecture

RISC

LCD Segments

48

Lead Finish

Tin/Silver/Copper

Max Processing Temp

260 °C

Maximum Operating Supply Voltage

3.6 V

Maximum Speed

100 MHz

Minimum Operating Supply Voltage

1.71 V

Mounting  

Surface Mount

Number of Timers

15

Number of I/O

94

Operating Supply Voltage

1.8, 2.5, 3.3 V

Voltage - Supply (Vcc/Vdd)

1.71V ~ 3.6V

Operating Temperature

-40 to 85 °C

Oscillator Type

Internal

Pin Count

144

Product Dimensions

13 x 13 x 1.27 mm

Program Memory Size

512KB (512K x 8)

Program Memory Type

Flash

Packaging

Tray

Part Status

Not For New Designs

Peripherals

DMA, I²S, LCD, LVD, POR, PWM, WDT

Package / Case

144-LBGA

Supplier Device Package

144-MAPBGA (13x13)

RAM Size

128K x 8

Speed

100MHz

Special Features

LCD Controller

Supplier Package

MAP-BGA

Base Part Number

MK53DN512

Lead Free Status / RoHS Status

Lead free / RoHS Compliant

Moisture Sensitivity Level (MSL)

3 (168 Hours)


MK53DN512ZCMD10 Datasheet PDF Download: 

MK53DN512ZCMD10 Datasheet PDF

Pinouts

There is no relevant information available for this part yet.

Description

The Kinetis® K53 100 MHz MCU family provides an analog measurement engine for medical and industrial applications.

Reduces core interruption, increasing performance

Enables design flexibility and system cost reduction

Increases system safety by restricting access to key memory locations

Provides scalability needed for key digital power and motor control applications

Shares the Kinetis portfolio’s comprehensive enablement support

Features

Ultra-Low-Power

10 low-power modes with power and clock gating for optimal peripheral activity and recovery times. Stop currents down to 2 µA, and run currents of <350 µA/MHz, with 4 µs wake-up eeom Stop mode

Full memory and analog operation down to 1.71 volts for extended battery life

Low-leakage wake-up unit with up to eight internal modules and 16 pins as wake-up sources in low-leakage stop (LLS)/very low-leakage stop (VLLS) modes

Low-power timer for continuous system operation in reduced power state

Flash, SRAM and FlexMemory

256 KB - 512 KB flash. Fast access, high reliability with four-level security protection

128 KB of SRAM

FlexMemory: Up to 256 bytes-4KB of user-segmentable byte write/erase EEPROM for data tables/system data. EEPROM with over 10M cycles and flash with 70 µsec write time (brownouts without data loss/corruption). No user or system intervention to complete programming and erase functions and full operation down to 1.71 volts. In addition, up to 256 KB can be used for extra program code, data or EEPROM backup

Up to two programmable gain amplifiers with x64 gain for small amplitude signal conversion

Mixed-Signal Capability

Two operational amplifiers allow signal filtering and amplification

Two trans-impedance amplifiers optimized for converting current inputs into voltages that can be read by the ADC

Two high-speed 16-bit ADCs with configurable resolution. Single or differential output mode operation for improved noise rejection. 500 ns conversion time achievable with programmable delay block triggering

Two 12-bit DACs for analog waveform generation for audio applications

Three high-speed comparators providing fast and accurate motor over-current protection by driving PWMs to a safe state

Analog voltage reference provides an accurate reference to analog blocks, ADC and DAC, and replaces external voltage references to reduce system cost

Performance

Arm® Cortex®-M4 core with DSP, 100MHz clock, single-cycle MAC, and single instruction multiple data (SIMD) extensions

16-channel DMA for peripheral and memory servicing with reduced CPU loading and faster system throughput

Crossbar switch enables concurrent multi-master bus accesses, increasing bus bandwidth

Independent flash banks allow concurrent code execution and firmware updating with no performance degradation or complex coding routines

Timing and Control

Up to three FlexTimers with a total of 12 channels. Hardware dead-time insertion and quadrature decoding for motor control

Carrier modulator timer for infrared waveform generation in remote control applications

Four-channel 32-bit periodic interrupt timer provides a time base for RTOS task scheduler or trigger source for ADC conversion and programmable delay block

Human-Machine Interface

Hardware touch-sensing interface with up to 16 inputs. Operates in all low power modes (minimum current adder when enabled). Hardware implementation avoids software polling method. High sensitivity level allows the use of overlay surfaces up to 5 mm thick

Flexible, low-power LCD controller with up to 320 segments (40x8 or 44x4). LCD blink mode enables low average power while remaining in low-power mode. Segment fail to detect guards against erroneous readouts and reduces LCD test costs. Frontplane/backplane reassignment provides pin-out flexibility easing PCB design and allows LCD configuration changes via firmware with no hardware re-work. Supports multiple 3V and 5V LCD panel sizes with fewer segments (pins) than competitive controllers and no external components. Unused LCD pins can be configured as other GPIO functions

Connectivity and Communications

IEEE 1588 Ethernet MAC with hardware time stamping provides precision clock synchronization for real-time industrial control

USB 2.0 On-The-Go (full speed). Device charge detect optimizes charging current/time for portable USB devices enabling longer battery life. Low-voltage regulator supplies up to 120 mA off-chip at 3.3V to power external components from a 5V input

Up to five UARTs with IrDA support including one UART with ISO7816 smart card support. Variety of data size, format and transmission/reception settings supported by multiple industrial communication protocols

Inter-IC Sound (I2S) serial interface for audio system interfacing

Up to three DSPI and two I2C

Reliability, Safety and Security

Hardware Encryption coprocessor for secure data transfer and storage. Faster than software implementations and with minimal CPU loading. Supports a wide variety of algorithms - DES, 3DES, AES, MD5, SHA-1, SHA-256

Memory protection unit provides memory protection for all masters on the crossbar switch, increasing software reliability

Cyclic redundancy check engine validates memory contents and communication data, increasing system reliability

Independent-clocked COP guards against clock skew or code runaway for fail-safe applications such as the IEC 60730 safety standard for household appliances

External watchdog monitor drives output pin to safe state external components if watchdog event occurs

This product is included in NXP®.s product longevity program, with assured supply for a minimum of 15 years after launch

External Peripheral Support

FlexBus external bus interface provides interface options to memories and peripherals such as graphics displays. Supports up to 6 chip selects and 2GB addressable space

Secure digital host controller supports SD, SDIO, MMC or CE-ATA cards for in-application software upgrades, media files or adding Wi-Fi support

Other data sheets within the file:

Datasheets

MK53DN512ZCMD10 Datasheet

MK53DN512ZCMD10 Datasheet

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) (REV 3)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) (REV 3)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) - Initial Product Rev (REV 7)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) - Initial Product Rev (REV 7)

Kinetis® K5x: Cortex-M4 MCUs with measurement engine (REV 5)

Kinetis® K5x: Cortex-M4 MCUs with measurement engine (REV 5)

PCN

Customer Information Notification

Customer Information Notification

Customer Information Notification

Customer Information Notification

KINETIS 100 MHZ ERRATA AND DATASHEET UPD

KINETIS 100 MHZ ERRATA AND DATASHEET UPD

KINETIS 100Mhz Device Errata Update

KINETIS 100Mhz Device Errata Update

KINETIS K-Series 100Mhz Family 8N30D COLD ELIMINATION

KINETIS K-Series 100Mhz Family 8N30D COLD ELIMINATION

KINETIS K-Series 100MHz Family 8N30D HOT ELIMINATION

KINETIS K-Series 100MHz Family 8N30D HOT ELIMINATION

Reference Manual

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) (REV 2)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) (REV 2)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) - Initial Product Rev (REV 6)

Kinetis K53: 100MHz Cortex®-M4 256/512KB Flash (144 pin) - Initial Product Rev (REV 6)

Test/Quality Data

Material Composition

Material Composition

Statement on EU REACH Provisions

Statement on EU REACH Provisions



0 comment

Leave a Reply

Your email address will not be published.

 
 
   
Rating: