Product Overview
Product Category: | Interface - Specialized |
Kynix Part #: | KY32-MCZ33903CP5EK |
Manufacturer Part#: | MCZ33903CP5EK |
Manufacturer | NXP USA Inc. |
Description: | IC SBC CAN HS 5.0V 32SOIC |
Package: | 32-SSOP (0.295", 7.50mm Width) Exposed Pad |
Datasheet: | |
Stock: | Yes |
Quantity: | 120 PCS |
MCZ33903CP5EK Images are for reference only:
Product Specifications
Categories | Integrated Circuits (ICs) Interface - Specialized |
Series | MC33903 |
Product Category | CAN Interface I |
Part Status | Obsolete |
Applications | System Basis Chip |
Interface | CAN |
Voltage - Supply | 5.5V ~ 28V |
Package / Case | 32-SSOP (0.295", 7.50mm Width) Exposed Pad |
Supplier Device Package | 32-SOIC-EP |
Mounting Type | Surface Mount |
Operating Supply Current | 4 mA |
Packaging | Tube |
Product Type | CAN Interface IC |
Protocol Supported | CAN, LIN |
Pin Count | 32 |
Package/Case | SOIC-32 |
Product Dimensions | 11.1 x 7.6 x 2.35 mm |
Subcategory | Interface ICs |
Type System | Basis Chip Gen2 |
Base Part Number | MCZ33903 |
Brand | NXP / Freescale |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
MCZ33903CP5EK Datasheet PDF Download:
Block Diagram
Fig. 1 33903 Internal Block Diagram
Application Diagram
Fig. 2 33903 Simplified Application Diagram
Pinout Diagram
Fig. 3 32 Pin Exposed Package
Description
The NXP® MC33903 is part of a second generation family of system basis chips, combining multiple features and enhanced module design.
l The MC33903 works as an advanced power management unit for the MCU and additional integrated circuits such as sensors and CAN transceivers
l Built-in enhanced high-speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection and fail-safe operation mode.
l The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches.
Features
l Voltage regulator for MCU, 5.0 V or 3.3 V, part number selectable, with possibility of usage external PNP to extend current capability and share power dissipation
l Voltage, current and temperature protection
l Extremely low quiescent current in low power modes
l Fully-protected embedded 5.0 V regulator for the CAN driver
l Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)
l Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs, with over-current detection and under-voltage protection
l MUX (except 33903B3/5) output pin for device internal analog signal monitoring and power supply monitoring
l Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring
l Multiple wake-up sources in low-power modes: CAN or LIN bus, I/O transition, automatic timer, SPI message and VDD over-current detection
l ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
Other data sheets within the file:
Datasheet | |
MC3390x Fact Sheet |  |
Application Notes | |
AN4770, Implementing the MC33903/4/5 CAN and LIN System Basis Chip - Application Note (REV 5.0) |  |
AN2409, Small Outline Integrated Circuit (SOIC) Package - Application Note (REV 3.0) |  |
AN4554, Interfacing MC33903/4/5 With MC9S08DZ60 - Application Notes (REV 0) |  |
Errata | |
MC33903, MC33904, and MC33905, Mask M87W, Rev. 3.2 Errata (REV 1.0) |  |
Recommended Documentation | |
MC33903-MC33904-MC33905, System Basis Chip Gen2 with High Speed CAN and LIN Interface - Data Sheet (REV 14.0) |  |
MC33903, MC33904, and MC33905, Mask M87W, Rev. 3.2 Errata (REV 1.0) |  |
PCN | |
Customer Information Notification |  |
SOIC32 CHD Fab SMOS8MV Copper Wire and Stamped Leadframe Qualification |  |
Test/Quality Data | |
Material Composition |  |
RoHS Certificate of Analysis |  |
Statement on EU REACH Provisions |  |
Users Guide | |
KIT33903BD5EVBE, KIT33903BD3EVBE, Evaluation Boards - User Guide (REV 1.0) |  |
0 comment 
