Product Overview
Product Category: | IC Chips |
Kynix Part #: | KY32-MCZ33390EFR2 |
Manufacturer Part#: | MCZ33390EFR2 |
Manufacturer | NXP USA Inc. |
Description: | IC TXRX SERIAL LINK 8-SOIC |
Package: | SOP8 |
Datasheet: | |
Stock: | Yes |
Quantity: | 19180 PCS |
MCZ33390EFR2 Images are for reference only:
Product Specifications
Categories | Integrated Circuits (ICs) Interface - Drivers, Receivers, Transceivers |
Series | - |
Packaging | Tape & Reel (TR) |
Part Status | Obsolete |
Type | Transceiver |
Protocol | J1850 |
Number of Drivers/Receivers | 1/1 |
Duplex | Half |
Receiver Hysteresis | 200mV |
Data Rate | 10.4Kbps |
Voltage - Supply | 9V ~ 16V |
Operating Temperature | -40°C ~ 125°C |
Operating Supply Current | 32 mA |
Mounting Type | Surface Mount |
Packaging | Cut Tape |
Packaging | Reel |
Product Category | Network Controller & Processor ICs |
Product Type | Network Controller & Processor ICs |
Subcategory | Communication & Networking ICs |
Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | 8-SOIC |
Height (Max) | 1.5 mm |
Length (Max) | 5 mm |
Width (Max) | 4 mm |
Base Part Number | MCZ33390 |
Brand | NXP / Freescale |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
MCZ33390EFR2 Datasheet PDF Download:
Block Diagram
Note This device contains approximately 400 active transistors and 250 gates.
Fig. 1 33390 Simplified Internal Block Diagram
Pin Connections
Fig. 2 33390 Pin Connections
Description
The 33390 is a serial transceiver designed to provide bi-directional half-duplex communication meeting the automotive SAE Standard J1850 Class B Data Communication Network Interface specification. It is designed to interface directly to on-board vehicle microcontrollers and serves to transmit and receive data on a single-wire bus at data rates of 10.4 kbps using Variable Pulse Width Modulation (VPWM).
The 33390 operates directly from a vehicle's 12 V battery system and functions in a logic fashion as an I/O interface between the microcontroller's 5.0 V CMOS logic level swings and the required 0 V to 7.0 V waveshaped signal swings of the bus. The bus output driver is short circuit current limited.
Features
• Designed for SAE J-1850 Class B Data Rates
• Full Operational Bus Dynamics Over a Supply Voltage of 9.0 to 16 V
• Ambient Operating Temperature of -40°C to 125°C
• Interfaces Directly to Standard 5.0 V CMOS Microcontroller
• BUS Pin Protected Against Shorts to Battery and Ground
• Thermal Shutdown with Hysteresis
• Voltage Waveshaping of Bus Output Driver
• 40 V Max VBAT Capability
• Pb-Free Packaging Designated by Suffix Code EF
Other data sheets within the file: