Home  Embedded-Microcontrollers

Apr 19 2019

MC9S08RD32DWE Datasheet PDF - IC S08 MCU 8BIT 32KB FLASH 28SOIC TRAY

Product Overview

Product Category:

Embedded - Microcontrollers

Kynix Part #:

KY32-MC9S08RD32DWE

Manufacturer Part#:

MC9S08RD32DWE

Manufacturer

NXP USA Inc.

Description:

IC S08 MCU 8BIT 32KB FLASH 28SOIC

Package:

28-SOIC (0.295", 7.50mm Width)

Datasheet:

MC9S08RD32DWE Datasheet

Stock:

Yes

Quantity:

527 PCS


MC9S08RD32DWE Images are for reference only:

MC9S08RD32DWE Image

Product Specifications 

Categories

Integrated Circuits (ICs)

Embedded - Microcontrollers

Brand

NXP / Freescale

Processor Series

MC9S08

Product Type

8-bit Microcontrollers - MCU

Subcategory

Microcontrollers - MCU

Unit Weight

0.026676 oz

Series

S08

Packaging

Tube

Part Status

Obsolete

Core Processor

S08

Core Size

8-Bit

Data Bus Width

8 bit

Data RAM Size

2 kB

Speed

8MHz

Connectivity

SCI

Peripherals

LVD, POR, PWM, WDT

Number of I/O 

23

Program Memory Size

32KB (32K x 8)

Program Memory Type

FLASH

Packaging

Tube

Height

2.36 mm

Length

18.05 mm

Width

7.6 mm

EEPROM Size

-

RAM Size

2K x 8

Voltage - Supply (Vcc/Vdd)

1.8V ~ 3.6V

Minimum Operating Temperature

- 40 C

Maximum Operating Temperature

+ 85 C

Data Converters

-

Oscillator Type

Internal

Maximum Clock Frequency

8 MHz

Mounting Type

Surface Mount

Number of Timers/Counters

2 Timer

Package / Case

28-SOIC (0.295", 7.50mm Width)

Program Memory Type

Flash

Supplier Device Package

28-SOIC

Base Part Number

MC9S08RD32

ADC Resolution

No ADC

Lead Free Status / RoHS Status

Lead free / RoHS Compliant

Moisture Sensitivity Level (MSL)

3 (168 Hours)


MC9S08RD32DWE Datasheet PDF Download:

MC9S08RD32DWE Datasheet PDF

MCU Block Diagram

MC9S08RD MCU Block Diagram

NOTES:

1. Port pins are software configurable with pullup device if input port

2. PTA0 does not have a clamp diode to VDD. PTA0 should not be driven above VDD. Also, PTA0 does not pullup to

VDD when internal pullup is enabled.

3. IRQ pin contains software configurable pullup/pulldown device if IRQ enabled (IRQPE = 1)

4. The RESET pin contains integrated pullup device enabled if reset enabled (RSTPE = 1)

5. High current drive

6. Pins PTA[7:4] contain both pullup and pulldown devices. Pulldown enabled when KBI is enabled (KBIPEn = 1) and rising edge is selected (KBEDGn = 1).

Fig. 1 MC9S08RD MCU Block Diagram

Pin Assignments

MC9S08RD in 44-Pin LQFP Package

Fig. 2 MC9S08RD in 44-Pin LQFP Package

MC9S08RD in 32-Pin LQFP Package

Fig. 3 MC9S08RD in 32-Pin LQFP Package

MC9S08RD in 28-Pin SOIC Package and 28-Pin PDIP Package

Fig. 4 MC9S08RD in 28-Pin SOIC Package and 28-Pin PDIP Package

MC9S08RD in 48-Pin QFN Package

Fig. 5 MC9S08RD in 48-Pin QFN Package

Description

The MC9S08RG is one of the members of the low-cost, high-performance HCS08 Family of 8-bit microcontroller units (MCUs). All MCUs in this family use the enhanced HCS08 core and are available with a variety of modules, memory sizes, memory types, and package types.

Features

Features of the MC9S08RC/RD/RE/RG Family of devices are listed here. Please see Table 1-1 for the features that are available on the different family members.

HCS08 CPU (Central Processor Unit)

• Object code fully upward-compatible with M68HC05 and M68HC08 Families

• HC08 instruction set with added BGND instruction

• Support for up to 32 interrupt/reset sources

• Power-saving modes: wait plus three stops

On-Chip Memory

• On-chip in-circuit programmable FLASH memory with block protection and security option

• On-chip random-access memory (RAM)

Oscillator (OSC)

• Low power oscillator capable of operating from crystal or resonator from 1 to 16 MHz

• 8 MHz internal bus frequency

Analog Comparator (ACMP1)

• On-chip analog comparator with internal reference (ACMP1)

• Full rail-to-rail supply operation

• Option to compare to a fixed internal bandgap reference voltage

Serial Communications Interface Module (SCI1)

• Full-duplex, standard non-return-to-zero (NRZ) format

• Double-buffered transmitter and receiver with separate enables

• Programmable 8-bit or 9-bit character length

• Programmable baud rates (13-bit modulo divider)

Serial Peripheral Interface Module (SPI1)

• Master or slave mode operation

• Full-duplex or single-wire bidirectional option

• Programmable transmit bit rate

• Double-buffered transmit and receive

• Serial clock phase and polarity options

• Slave select output

• Selectable MSB-first or LSB-first shifting

Timer/Pulse-Width Modulator (TPM1)

•2-channel, 16-bit timer/pulse-width modulator (TPM1) module that can operate as a free-running counter, a modulo counter, or an up-/down-counter when the TPM is configured for center-aligned PWM

• Selectable input capture, output compare, and edge-aligned or center-aligned PWM capability on each channel

Keyboard Interrupt Ports (KBI1, KBI2)

• Providing 12 keyboard interrupts

• Eight with falling-edge/low-level plus four with selectable polarity

• KBI1 inputs can be configured for edge-only sensitivity or edge-and-level sensitivity

Carrier Modulator Timer (CMT)

• Dedicated infrared output (IRO) pin

• Drives IRO pin for remote control communications

• Can be disconnected from IRO pin and used as output compare timer

• IRO output pin has high-current sink capability

Development Support

• Background debugging system (see also the Development Support chapter)

• Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)

• Debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Debug module supports both tag and force breakpoints.

Port Pins

• Eight high-current pins (limited by maximum package dissipation)

• Software selectable pullups on ports when used as input. Selection is on an individual port bit basis. During output mode, pullups are disengaged.

• 39 general-purpose input/output (I/O) pins, depending on package selection

Package Options

• 28-pin plastic dual in-line package (PDIP)

• 28-pin small outline integrated circuit (SOIC)

• 32-pin low-profile quad flat package (LQFP)

• 44-pin low-profile quad flat package (LQFP)

• 48-pin quad flat package (QFN)

System Protection

• Optional computer operating properly (COP) reset

• Low-voltage detection with reset or interrupt

• Illegal opcode detection with reset

• Illegal address detection with reset (some devices dont have illegal addresses)

Other data sheets within the file:

Datasheet

MC9S08R Series Datasheet

MC9S08R Series Datasheet

Development Tool Selector

Development Tool Selector

EOL

End of Life due to low sales

End of Life due to low sales

PCN

Copper Wire Conversion for Microcontroller and Microprocessor Devices

Copper Wire Conversion for Microcontroller and Microprocessor Devices

Product And Process Change Notification

Product And Process Change Notification

Multiple Devices Polyimide Removal 09/Jul/2013

Copper Wire Conversion 20/May/2014

Multiple Devices Polyimide Removal 09/Jul/2013  Copper Wire Conversion 20/May/2014


0 comment

Leave a Reply

Your email address will not be published.

 
 
   
Rating: