Product Overview
Product Category: | Embedded - Microcontrollers |
Kynix Part #: | KY32-MC9S08QE64CLH |
Manufacturer Part#: | MC9S08QE64CLH |
Manufacturer | NXP USA Inc. |
Description: | IC MCU 8BIT 64KB FLASH 64LQFP |
Package: | LQFP64 |
Datasheet: | |
Stock: | Yes |
Quantity: | 2514 PCS |
MC9S08QE64CLH Images are for reference only:
Product Specifications
Package Description | 10 X 10 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, MS-026BCD, LQFP-64 |
Part Status | Active |
HTS | 8542.31.00.01 |
Core Architecture | S08 |
Family Name | S08 |
Microprocessor/Microcontroller/Peripheral IC Type | MICROCONTROLLER |
ADC Channels | 22 |
ADC Resolution (bit) | 12 |
Address Bus Width | 0.0 |
Analog Comparators | 2 |
CECC Qualified | No |
Core Processor | S08 |
Bit Size | 8 |
Clock Frequency-Max | 16.0 MHz |
DAC Channels | No |
DMA Channels | No |
Device Core | S08 |
Data Bus Width (bit) | 8 |
External Data Bus Width | 0.0 |
Instruction Set Architecture | CISC |
JESD-30 Code | S-PQFP-G64 |
JESD-609 Code | e3 |
Mounting | Surface Mount |
Maximum CPU Frequency | 50.33 MHz |
Maximum Clock Rate | 50.33 MHz |
Number of I/O Lines | 56.0 |
Number of Terminals | 64 |
Number of Timers | 1 |
Number of ADCs | Single |
Operating Temperature-Min | -40.0 Cel |
Operating Temperature-Max | 85.0 Cel |
Pin Count | 64 |
PCB changed | 64 |
Packaging | Tray |
Package Body Material | PLASTIC/EPOXY |
Program Memory Type | Flash |
Program Memory Size | 64KB |
Programmability | Yes |
Package Code | LFQFP |
Peripherals | LVD, PWM, WDT |
Package Equivalence Code | QFP64,.47SQ,20 |
Package Shape | SQUARE |
Package Style | FLATPACK, LOW PROFILE, FINE PITCH |
Peak Reflow Temperature | 260 Cel |
Power Supplies | 1.8/3.6 |
PWM Channels | Yes |
PWM | 1 |
USART | 0 |
UART | 0 |
USB | 0 |
SPI | 2 |
I2C | 2 |
I2S | 0 |
CAN | 0 |
Ethernet | 0 |
Watchdog | 1 |
Qualification Status | Not Qualified |
RAM (bytes) | 4096.0 |
RAM Size | 4KB |
ROM Programmability | FLASH |
ROM (words) | 65536 |
Seated Height-Max | 1.6 mm |
Speed | 50.33 MHz |
Sub Category | Microcontrollers |
Supply Voltage-Nom | 3.0 V |
Supply Voltage-Min | 1.8 V |
Supply Voltage-Max | 3.6 V |
Typical Operating Supply Voltage | 3.3|2.5 V |
Supplier Package | LQFP |
Standard Package Name | QFP |
Surface Mount | Yes |
Technology | CMOS |
Temperature Grade | INDUSTRIAL |
Terminal Finish | Matte Tin (Sn) |
Terminal Form | Gull-wing |
Terminal Pitch | 0.5 mm |
Terminal Position | QUAD |
Time@Peak Reflow Temperature-Max | 40 s |
Length | 10.0 mm |
Width | 10.0 mm |
Height (Max) | 1.45 mm |
Base Part Number | MC9S08QE64 |
EU RoHS | Compliant |
ECCN (US) | 3A991.a.2 |
Lead Shape | Gull-wing |
China RoHS Compliant | Yes |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
MC9S08QE64CLH Datasheet PDF Download:
Block Diagram
Fig. 1 MC9S08QE32 Series Block Diagram
Description
The S08QE family, comprised of a pin-compatible 8-bit and 32-bit device duo, is Our first family in the Flexis series. The Flexis series of controllers is the connection point of the NXP® Controller Continuum where 8- and 32-bit compatibility become reality.
The S08QE128 pushes the boundaries of the 8-bit architecture performance with 128 KB of flash, 24 analog-to-digital converter (ADC) channels and delivering up 25 MHz in bus frequency. The 32-bit MCF51QE128 is pin-, peripheral- and tool-compatible with the 8-bit S08QE128 device. They share a common set of peripherals and development tools, delivering the ultimate in migration flexibility.
Features
Power-Saving Features
l Two ultra-low-power stop modes, one of which allows limited use of peripherals
l New low-power run and wait modes
l 6 µs typical wake up time from stop mode
l Internal clock Source (ICS)—module containing a frequency locked-loop (FLL) controlled by internal or external reference
l Oscillator (OSC)—loop-control Pierce oscillator
l crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
l Clock gating disables clocks to unused peripherals
8-bit HCS08 Central Processing Unit (CPU)
l Up to 20 MHZ HCS08 CPU from 1.8V to 3.6V and across temperature range of -40°C to +85°C
l HCS08 instruction set with added BGND instruction
l Support for up to 32 interrupt/reset sources
On-Chip Memory
l Up to 128 KB flash read/program/erase over full operating voltage and temperature
l Up to 8 KB random-access memory (RAM)
Peripherals
l Two analog comparator (ACMP)
Option to compare to an internal reference
Output can be optionally routed to TPM as input capture trigger
l Analog Digital Converter (ADC)
Up to 24-channel
12-bit resolution
2.5 µs conversion time
Automatic compare function
1.7 mV/°C temperature sensor
Internal bandgap reference channel
Operation in low-power stop3
l 2x Serial communications interface (SCI)
Two modules 0ffering asynchronous communications
13-bit break option
Flexible baud rate generator
Double buffered transmit and receive
Optional H/W parity checking and generation
l Up to 2x Serial Peripheral Interfaces (SPI)
Two modules with full-duplex or single-wire bidirectional double-buffered transmit and receive master or slave mode MSB-first or LSB-first shifting
l Timer/pulse-width modulator (TPM)
One 6-channel (TMP3)
Two 3-channel (TPM1 and TPM2)
Selectable input capture
Output compare
Or buffered edge- or center-aligned PWM on each channel
l Two I2C
Up to 100 kbps with maximum bus loading
Multi-master operation
Programmable slave address
Interrupt-driven byte-by-byte data transfer
Supports broadcast mode and 10-bit addressing
Input/Output
l Up to 70 GPIO (General Purpose Input/Output), one input-only and one output-only pin
l 16 Keyboard Interrupts (KBI) pins with selectable polarity
System Protection
l Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
l Low-voltage detection with reset or interrupt, selectable trip points
l Illegal op code detection with reset
l Flash block protection
Development Support
l Single-wire background debug interface
l Breakpoint capability
l ICE debug module —debug module supports both tag and force breakpoints
Three comparators
Nine trigger modes
Eight deep FIFO for storing change-of-flow addresses and event-only data
Supports both tag and force breakpoints
Other data sheets within the file:
Datasheets | |
MC9S08QE64,96,128 Datasheet |  |
MC9S08QE8 Series - Data Sheet (REV 8.1) |  |
MC9S08QE128 Series - Data Sheet (REV 7.1) |  |
MC9S08QE32 Series - Data Sheet (REV 7.1) |  |
Application Notes | |
Migrating Code Between Coldfire V1 and V2 |  |
Migrating from the MC9S08QE32 to the MCF51QE32 |  |
Technical Resources | |
Software Files for AN3467 |  |
Test/Quality Data | |
Material Composition |  |
RoHS Certificate of Analysis |  |
Statement on EU REACH Provisions |  |
Users Guide | |
NXP® Embedded GUI Converter Utility 2.0 Quick - User’s Guide (REV 1) |  |
Software to accompany QE128QRUG (REV Rev. 0) |  |
QE128 Quick Reference - User’s Guide (REV 1) |  |
S08 Peripheral Module Quick Reference A Compilation of Demonstration Software for S08 Modules - User’s Guide (REV 1) |  |
0 comment 
