Product Overview
Product Category: | Embedded - Microcontrollers |
Kynix Part #: | KY32-MC9S08AC32MFJE |
Manufacturer Part#: | MC9S08AC32MFJE |
Manufacturer | NXP USA Inc. |
Description: | IC MCU 8BIT 32KB FLASH 32LQFP |
Package: | 32-LQFP |
Datasheet: | |
Stock: | Yes |
Quantity: | 9876 PCS |
MC9S08AC32MFJE Images are for reference only:
Product Specifications
Categories | Integrated Circuits (ICs) Embedded - Microcontrollers |
Series | S08 |
Part Status | Active |
ADC Resolution | 10 bit |
Analog Comparators | 2 |
Packaging | Tray |
Core Processor | S08 |
Core Size | 8-Bit |
Speed | 40MHz |
Connectivity | I²C, SCI, SPI |
Peripherals | LVD, POR, PWM, WDT |
Data Bus Width | 8 Bit |
Data RAM Size | 2 kB |
Height | 1.4 mm |
Length | 7 mm |
Width | 7 mm |
Instruction Set Architecture | CISC |
Lead Finish | Matte Tin |
Mounting Type | Surface Mount |
Maximum Clock Frequency | 20 MHz |
Max Processing Temp | 260 Cel |
Number of I/O | 22 |
Number of ADC Channels | 16 |
Number of Timers | 8 |
Program Memory Size | 32KB (32K x 8) |
Program Memory Type | FLASH |
EEPROM Size | - |
RAM Size | 2K x 8 |
Voltage - Supply (Vcc/Vdd) | 2.7V ~ 5.5V |
Data Converters | A/D 6x10b |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 125°C (TA) |
On-Chip ADC | 6-chx10-bit |
Operating Supply Voltage | 3.3, 5 V |
Package / Case | 32-LQFP |
Supplier Device Package | 32-LQFP (7x7) |
Product Category | 8-bit Microcontrollers - MCU |
Processor Series | MC9S08 |
Product Type | 8-bit Microcontrollers - MCU |
Subcategory | Microcontrollers - MCU |
Product Dimensions | 7 x 7 x 1.45 mm |
Base Part Number | MC9S08AC32 |
Brand | NXP / Freescale |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
MC9S08AC32MFJE Datasheet PDF Download:
Pinouts
There is no relevant information available for this part yet.
Description
The AC family, comprised of pin-compatible 8-bit and 32-bit device duos, is the third family in the Flexis® series. The Flexis series of controllers is the connection point on Our Controller Continuum, where 8- and 32-bit compatibility becomes reality.
The S08AC128/96/60/48/32 pushes the boundaries of the 8-bit architecture performance with 128 KB of flash, three timer/pulse-width modulators (PWM), 16-channel, 10-bit analog-to-digital converter (ADC) and up to 20 MHz in bus frequency. The 8-bit S08AC128/96/60/48/32 are pin-, peripheral- and tool-compatible with the 32-bit MCF51AC256/128 devices. They share a common set of peripherals and development tools to deliver the ultimate in migration flexibility.
Features
Internal Clock Generator
l Programmable frequency-locked loop(FLL) generates 8 MHz to 40 MHz
l Provides multiple options for internal and external clock source and in-application clock switching
l Trimmable with temperature and voltage compensation
10-bit Analog-to-Digital Converter
l 10-bit Analog-to-Digital Converter
l 2.5µs, 10-bit single conversion time
Timer with Ten Programmable Channels
l Two 2-channes 16-bit timer systems
l One 6-channel 16-bit timer systems
l Programmable for input, capture, output compare or buffered pulse-width modulator (PWM)
PWM can be edge or center aligned
Extensive Serial Communications
l Dual asynchronous SCIs
Flexible 13-bit module-based baud rate generators
LIN compatible
l Inter-integrated circuit (I2C)
Up to 100 Kbps
Supports broadcasting mode and 10-bit addressing
l Synchronous SPI
Multi-master operation
System Protection
l Selectable low-voltage detect/reset
l COP watchdog timer
Option to run COP off independent clock source or bus
l Cyclic redundancy check (CRC)
Input/Output
l Up to 56 GPIO pins
Programmable pull-ups
High-current drivers
Controlled rise/fall times minimize noise
On-Chip Debug Interface
l Single-wire background debug mode
l Non-intrusive emulation
l On-chip in-circuit emulator (ICE) debug module containing two comparators and nine trigger modes
l View and change internal registers and memory while running an application
Other data sheets within the file: