Product Overview
Product Category: | Embedded - Microcontrollers |
Kynix Part #: | KY32 - COP8SDR9LVA8 |
Manufacturer Part#: | COP8SDR9LVA8 |
Manufacturer | Texas Instruments |
Description: | IC MCU 8BIT 32KB FLASH 68PLCC |
Package: | 68-LCC (J-Lead) |
Datasheet: | |
Stock: | Yes |
Quantity: | 73 PCS |
COP8SDR9LVA8 Images are for reference only:
Product Specifications
Product Category | Embedded - Microcontrollers |
Manufacturer | Texas Instruments |
Series | COP8™ 8S |
Package/Case | 68-LCC (J-Lead) |
Packaging | Tube |
Access Time | 20 µs |
ADC Channels | No |
ADC Resolution | No ADC |
Address Bus Width | 0.0 |
Bit Size | 8 |
Core | COP8 |
Core Size | 8-Bit |
Core-Processor | COP8 |
CPU Family | COP800 |
Connectivity | Microwire/Plus (SPI), UART/USART |
Clock Frequency Max | 10.0 MHz |
DAC Channels | No |
DMA Channels | No |
Data Bus Width | 8 bit |
Data RAM Size | 1 kB |
Data Converters | - |
EEPROM Size | - |
External Data Bus Width | 0.0 |
Frequency | 20 MHz |
Interface-Type | SPI, USART |
JESD-30 Code | S-PQCC-J68 |
JESD-609 Code | e0 |
Mounting Type | Surface Mount |
Mounting Style | SMD/SMT |
Moisture Sensitivity Level | 1 |
Maximum Clock Frequency | 10 MHz |
Number of I/O | 59 |
Number of Pins | 68 |
Number of I/O Lines | 60.0 |
Number of Timers | 3 |
Number of Terminals | 68 |
Oscillator Type | Internal |
Operating Supply Voltage | 2.7 V to 5.5 V |
Operating Temperature Min | - 40 °C |
Operating Temperature Max | 85.0 °C |
PWM Channels | Yes |
Peripherals | POR, PWM, WDT |
Power Supplies | 3/5 |
Package Body Material | PLASTIC/EPOXY |
Package Code | QCCJ |
Package Equivalence Code | LDCC68,1.0SQ |
Package Shape | SQUARE |
Package Style | CHIP CARRIER |
Peak Reflow Temperature | 220 °C |
Program Memory Size | 32 kB (32K x 8) |
Program Memory Type | FLASH |
Speed | 20.0 MHz |
Sub Category | Microcontrollers |
Supply Current Max | 14.7 mA |
Supply Voltage Nom | 5.0 V |
Supply Voltage Min | 2.7 V |
Supply Voltage Max | 5.5 V |
Seated Height Max | 4.57 mm |
Supplier Device Package | 68-PLCC (25.13x25.13) |
Surface Mount | Yes |
Technology | CMOS |
Terminal Finish | Tin/Lead (Sn85Pb15) |
Terminal Form | J BEND |
Terminal Pitch | 1.27 mm |
Terminal Position | QUAD |
Temperature Grade | INDUSTRIAL |
Time@Peak Reflow Temperature-Max | NOT SPECIFIED |
RAM Size | 1K x 8 |
RAM (bytes) | 1024.0 |
ROM (words) | 32768 |
ROM Programmability | FLASH |
Length | 24.13 mm |
Width | 24.13 mm |
Unit-Weight | 0.171777 oz |
COP8SDR9LVA8 Datasheet PDF Download:
Block Diagram
Figure 1. Block Diagram
Figure 2. Interrupt Block Diagram
Description
The COP8SBR9/SCR9/SDR9 Flash based microcontrollers are highly integrated COP8™ Feature core devices, with 32k Flash memory and advanced features including Virtual EEPROM, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.
Features
• KEY FEATURES
– 32 kbytes Flash Program Memory with Security Feature
– Virtual EEPROM using Flash Program • USART (2) Memory
– 1 kbyte Volatile RAM
– USART with on Chip Baud Generator
– 2.7V–5.5V In-System Programmability of Flash
– High Endurance - 100k Read/Write Cycles
– Superior Data Retention - 100 years
– Dual Clock Operation with HALT/IDLE Power Save Modes
– Three 16-bit Timers:
• Timers T2 and T3 can Operate at High Speed (50 ns Resolution)
• Processor Independent PWM mode
• External Event counter mode
• Input Capture mode
– Brown-out Reset (COP8SBR9/SCR9)t
• OTHER FEATURES
– Single Supply Operation: 2.7V–5.5V
– Quiet Design (Low Radiated Emissions)
– Multi-Input Wake-up with Optional Interrupts
– MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
– Clock Doubler
• 20 MHz Operation from 10 MHz Oscillator with 0.5μs Cycle
• 6.67 MHz operation from 3.33 MHz oscillator with 1.5 μs instruction cycle (COP8SBR9)
– Thirteen Multi-Source Vectored Interrupts Servicing:
• External Interrupt
• USART (2)
• Idle Timer T0
• Three Timers (Each with 2 Interrupts)
• MICROWIRE/PLUS Serial Peripheral Interface
• Multi-Input Wake-Up
• Software Trap
– Idle Timer with Programmable Interrupt Interval
– 8-bit Stack Pointer SP (Stack in RAM)
– Two 8-bit Register Indirect Data Memory Pointers
– True Bit Manipulation
– WATCHDOG and Clock Monitor logic
– Software Selectable I/O Options
• TRI-STATE Output/High Impedance Input
• Push-Pull Output
• Weak Pull Up Input
– Schmitt Trigger Inputs on I/O Ports
– High Current I/Os
– Temperature Range: –40°C to +85°C and -40°C to +125°C (COP8SCR9/SDR9)
– Packaging: 44 and 68 PLCC, 44 WQFN, 48 and 56 TSSOP
– True In-System, Real Time Emulation and Debug Offered by MetaLink's Development Systemstools Available
Other data sheets within the file:
Datasheet | |
COP8SDR9LVA8 Datasheet | ![]() |