Home  Embedded-Microcontrollers

Apr 16 2019

BCM54610C1IFBG Datasheet PDF - PHY 1-CH 1000Mbps 100-Pin F-BGA Communication Broadcom

Product Overview

Product Category:

IC Chips

Kynix Part #:

KY32-BCM54610C1IFBG

Manufacturer Part#:

BCM54610C1IFBG

Manufacturer

Broadcom Limited

Description:

Single Gigabit PHY

Package:

BGA896

Datasheet:

BCM54610C1IFBG Datasheet

Stock:

Yes

Quantity:

95 PCS


BCM54610C1IFBG Images are for reference only:

There is no relevant information available for this part yet.

Product Specifications 

Family

BCM54610

Part Status

Active

Integrated CDR

No

JTAG Support

Yes

Lead Free

Yes

Maximum Data Rate

1000 Mbps

Mounting

Surface Mount

Number of Channels per Chip

1

Overhead Octet Support

No

PHY Line Side Interface

Yes

Pin Count

100

Standard Supported

10BASE-T|100BASE-TX|1000BASE-T|IEEE 802.3|IEEE 802.3u|IEEE 802.3

Supplier Package

FBGA

UTOPIA Level

No

ECCN

5A991

HTSN

8542390000"8542.39.00.01

SCHEDULE B

8542390000"8542.39.00.00


BCM54610C1IFBG Datasheet PDF Download:

BCM54610C1IFBG Datasheet PDF

Block Diagram

BCM54610 Reference Design.png

Fig. 1 BCM54610 Reference Design

Description

The BCM54610 is optimized for low power and small footprint size to enable uplink and general GbE connectivity applications. By lowering system cost and reducing power dissipation, the BCM54610 enables a new class of cost-effective GbE equipment, driving the delivery of Gigabit bandwidth to the desktop. The BCM54610 digital signal processor-based architecture and advanced power management techniques combine to achieve robust and low power operation over the existing CAT-5 twisted-pair wiring. The BCM54610 architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks, and, at less than 500 mW per port, the BCM54610 has the industry's lowest power. Additionally, the BCM54610 has extremely low EMI emissions, which reduces the design constraints required to meet EMI emissions specifications.The BCM54610 supports the IEEE 802.3 standard Reduced Gigabit Media Independent Interface (RGMII). RGMII is a reduced pin-count (12 versus 25) version of the Gigabit Media Independent Interface (GMII). The small package, multiple MAC interfaces, and streamlined power supply lower system cost and simplify the system and board level design.

This device is another member of the Broadcom 65-nm Gigabit copper PHY family, joining the BCM54680. The optimal 65-nm process offers the best performance, lowest cost, and lowest power for Gigabit copper solutions. Further, devices based on the 65-nm process offer an excellent long-term cost curve, enabling better cost reduction over time compared to older technologies, without having to redesign or requalify a new part.The BCM54610 incorporates a variety of advanced features. The link quality indicator LED provides installers with immediate visual notification of any problems with the wiring plant supporting operation at the desired speed. This includes physical wiring defects that the BCM54610 cannot automatically correct and channel conditions such as excessive cable length and return loss, crosstalk echo and noise.

Features

Fully integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet (GbE) transceiver

RGMII MAC interface options

On-chip low-voltage regulator

Fully compliant with IEEE 802.3™, 802.3u, and 802.3ab standards

65-nm CMOS—low power and cost

Low power

    Less than 500 mW per port

    Advanced power management

Trace matched output impedance

Line-side loopback

Low electromagnetic interference (EMI) emissions

Cable-plant diagnostics

    Cable plant analyzer function detects cable plant impairments

    Link quality indication LED

    Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity

    Automatic MDI/MDIX crossover at all speeds

Robust CESD tolerance

Support for jumbo packets up to 10 KB

IEEE 1149.1 (JTAG) boundary sca

48-pin MLP and 100-pin FBGA packages

Other data sheets within the file:

There is no relevant information available for this part yet.


0 comment

Leave a Reply

Your email address will not be published.

 
 
   
Rating: